DTP 340M MULTI-FORMAT
BINDING PUNCH

The DTP-340M is a high performance punching system with the option of having attachable modules, to create an all-in-one punching and binding system. This can consist of either wire, plastic comb or coil binding.

Tool Change	Setting Margin Clearance	Chad Waste Compartment
Simpler, faster tool changes in less than 1 minute, thanks to quick-release fastener.	Rotary knob used to set the ideal perforating margin clearance (except thumbhole tools).	Large chad compartment can be removed from the front or the side.

The complete set of features are listed below along with the technical specification of the Renz DTP 340M.

FEATURES
Electrical desktop high performance punching machine. Modular extension as punch and binding machine for WIRE, COMB, COIL. Binding and inserting modules can easily be added. Working width 340mm. Easily punches up to 20,000 sheets/h (70/80gsm). Punches up to 35 sheets (80gsm) in one cycle. The new drive system saves energy. Motor runs only if foot switch is pressed and will stop immediately after releasing. Electrically operated by foot switch. Punching cycle 1 second. Exchangeable dies with fast and easy die change. Large capacity waste tray.
TECHNICAL SPECIFICATION
Dimensions (L x W x H): 360 x 490 x 250 mm. Weight: 40kg. Working Width: 340mm. Motor: 230 V / 50 Hz / 0,25 kW or 115 V / 60 Hz / 250 W.

For further information on the above binding punch or for a free catalogue of our products and supplies then please contact us by telephone, or complete our Enquiry Form.